peakemb web store FAQ section

Hot fix rhinestones are rhinestones that have been cut with flat backs and have heat-activated adhesive applied to them, which allows them to be pressed onto fabric. A rhinestone transfer is a group of hot fix rhinestones that have been arranged in some kind of design so that it can be heat pressed onto fabric. It may be referred to as a "rhinestone heat transfer" "hot-fix transfer", "rhinestone iron on transfer" or "rhinestone motif".

When our rhinestone transfers are applied correctly, your rhinestone apparel can withstand normal everyday wear and tear. However, we recommend that the shirt be turned inside out and machine washed on normal settings. Either hang to dry or tumble dry on low heat. Please do not dry clean.

We have our own rhinestone equipment so that is no problem - just email us and let us know the design and color and we will let you know the turnaround and cost.

Just email us your custom rhinestone transfer requirements and we will provide a digital proof of your rhinestone design along with a quote within 1 - 3 business days.

It’s depends on each item. Usually speaking, 1-3 days will be ok, according to your total order.

It’s depends on the destination. Usually speaking, 3-5 business days will be ok.

We accept PayPal, T/T.

We recommend using a heat press to apply our rhinestone transfers. It will ensure that even heat and pressure is applied throughout the design. Step 1: Lay garment on flat surface. Do not use a padded ironing board. For thin garments place a pressing cloth or a piece of flat cardboard inside of garment. Step 2: Remove the protecting foil and make sure that all stones are in place and none of the stones have shifted during shipment. If stones have shifted, use tweezers to re-position the stones into the correct place. Step 3: Place sticky side of paper onto garment and adjust to correct position. Cover the transfer paper with a pressing cloth or Teflon Sheet. Step 4: Apply heat by lowering iron straight down onto transfer area and push hard for 25-30 seconds. Make sure to cover entire transfer area. DO NOT MOVE IRON AROUND! Heavier fabrics such as denim might need more time and light fabrics less time. If you are using a heat press do not over do the pressure or you will leave pressure marks on garment. Press for 15-20 seconds. Step 5: Remove the sticker from the cloth after cooling.